Omron RX2 Series User Manual page 434

8 Applied Settings
 Parameter
Item
PID1 Deviation over
level
PID2 Deviation over
level
PID3 Deviation over
level
PID4 Deviation over
level
 Output Signal Function
Item
PID1 deviation exces-
sive signal
PID2 deviation exces-
sive signal
PID3 deviation exces-
sive signal
PID4 deviation exces-
sive signal
PID Feedback Comparison Signal (FBV)
Output terminal signal will be turned OFF when each PID feedback reaches beyond respective PID set
ranges.
Precautions for Correct Use
• Set PID1 feedback to be OFF level ≥ ON level. OFF operation will be prioritized when it is set
to Off level  ON level.
• Setting ON level/OFF level to be other than 0.00 starts outputting of a feedback comparison
signal.
PID feedback (%)
PID1 feedback/
PID2 feedback/
PID3 feedback/
PID4 feedback
0%
Operation command
FBV1/FBV2/FBV3/FBV4
8 - 34
Terminal
Data
name
0.00 to
[AH-72]
100.00(%)
0.00 to
[AJ-17]
100.00(%)
0.00 to
[AJ-37]
100.00(%)
0.00 to
[AJ-57]
100.00(%)
Terminal name Data
OD 045
OD2 047
OD3 089
OD4 091
ON
ON
High-function General-purpose Inverter RX2 Series User's Manual
Description
045 [OD] signal output judgment level
047 [OD2] signal output judgment level
089 [OD3] signal output judgment level
091 [OD4] signal output judgment level
Description
Signal will be turned ON when the difference
between PID target value and feedback value
exceeds the range of PID1 deviation excessive level.
Signal will be turned ON when the difference
between PID target value and feedback value
exceeds the range of PID2 deviation excessive level.
Signal will be turned ON when the difference
between PID target value and feedback value
exceeds the range of PID3 deviation excessive level.
Signal will be turned ON when the difference
between PID target value and feedback value
exceeds the range of PID4 deviation excessive level.
OFF level
[AH-73]/[AJ-18]/[AJ-38]/[AJ-58]
ON level
[AH-74]/[AJ-19]/[AJ-39]/[AJ-59]
Time (s)
ON
Default
data
3.00