Preventing Read And Write Of Unnecessary Data - Omron RX2 Series User Manual

3-11 Preventing Read and Write of
Unnecessary Data
You can configure the prohibition of data reading and writing via LCD operator.
By setting [UA-18] Data R/W selection to 01, Read/Write access from LCD operator is disabled, and
read and write of unnecessary data can be prevented.
After the parameter is confirmed, if it is set to 01 after data is read for backup, unnecessary read and
write can be prevented.
 Parameter
Item
Data R/W selection
High-function General-purpose Inverter RX2 Series User's Manual
Parameter Data
[UA-18] 00 R/W enabled. Read and write are possible.
01 R/W disabled. Read and write are prohibited.
3 Operation
Description
3
3 - 49