Omron RX2 Series User Manual page 682

9 Communications Functions
Modbus
Register
register
No.
spec. No.
Output voltage monitor
4282h 4281h
optional output enable
Output voltage monitor
4283h 4282h
optional output value setting
Output torque monitor
4284h 4283h
optional output enable
Output torque monitor
4285h 4284h
optional output value setting
Start with frequency matching
4286h 4285h
optional Setting enable
Start with frequency matching
4287h 4286h
optional value setting
*1. On the parameter about the current and the voltage, the figures and the units to be handled vary in the setting path.
1) Operator or CX-Drive: 0.1 A or 0.1 V (When CX-Drive is operated, set [CF-11] Resister data selection to 00 (A,V). When
the data of [CF-11] Resister data selection is not set to 00 (A,V), it is not set or displayed correctly.)
2) Modbus: The current and the voltage vary, depending on the setting of Resister data selection [CF-11].
When [CF-11] Resister data selection is set to 00 (A,V), 0.1 A, 0.1 V
When [CF-11] Resister data selection is set to 01 (%), 0.01% (Rated ratio)
3) Drive programming: 0.01% (Rated ratio)
9 - 90
Parameter
Function name
No.
PA-26
PA-27
PA-28
PA-29
PA-30
PA-31
High-function General-purpose Inverter RX2 Series User's Manual
R/W Monitor or setting data
00: Disabled
01: Enabled: parameter setting
[PA-27]
02: (Enabled: set from [Ai1]
R/W 03: Enabled: set from [Ai2]
04: (Enabled: set from [Ai3]
05: (Reserved)
06: (Reserved)
07: (Reserved)
200V class: 0-3000
R/W
400V class: 0-6000
00: Disabled
01: Enabled: parameter setting
[PA-29]
02: (Enabled: set from [Ai1]
R/W 03: Enabled: set from [Ai2]
04: (Enabled: set from [Ai3]
05: (Reserved)
06: (Reserved)
07: (Reserved)
R/W -5000 to 5000
00: Disabled
01: Enabled: parameter setting
[PA-31]
02: Enabled: set from [Ai1]
R/W 03: Enabled: set from [Ai2]
04: Enabled: set from [Ai3]
05: (Reserved)
06: (Reserved)
07: (Reserved)
R/W 0 to 59000
Resolution
-
0.1(V)
-
0.1(%)
-
0.01(Hz)