Omron RX2 Series User Manual page 663

Modbus
Register
register
No.
spec. No.
Electronic thermal level set-
5AAAh 33A9h
ting, 2nd-motor
Electronic thermal character-
5AABh 5AAAh
istic selection, 2nd-motor
Electronic thermal Subtraction
5AACh 5AABh
function enable, 2nd-motor
Electronic thermal Subtraction
5AADh 5AACh
time, 2nd-motor
Free electronic thermal fre-
5AB4h 5AB3h
quency-1, 2nd-motor
Free electronic thermal cur-
5AB5h 5AB4h
rent-1, 2nd-motor
Free electronic thermal fre-
5AB6h 5AB5h
quency-2, 2nd-motor
Free electronic thermal cur-
5AB7h 5AB6h
rent-2, 2nd-motor
Free electronic thermal fre-
5AB8h 5AB7h
quency-3, 2nd-motor
Free electronic thermal cur-
5AB9h 5AB8h
rent-3, 2nd-motor
*1. On the parameter about the current and the voltage, the figures and the units to be handled vary in the setting path.
1) Operator or CX-Drive: 0.1 A or 0.1 V (When CX-Drive is operated, set [CF-11] Resister data selection to 00 (A, V).
When the data of [CF-11] Resister data selection is not set to 00 (A, V), it is not set or displayed correctly.)
2) Modbus: The current and the voltage vary, depending on the setting of Resister data selection [CF-11].
When [CF-11] Resister data selection is set to 00 (A, V), 0.1 A, 0.1 V
When [CF-11] Resister data selection is set to 01 (%), 0.01% (Rated ratio)
3) Drive programming: 0.01% (Rated ratio)
*2. Minimum resistance values vary in inverter model.
*3. 3G3RX2-B4750 to 3G3RX2-B413K shall be as follows.
[Ub-03]=02: 0.5 to 10.0(kHz)
[Ub-03]=00 or 01: 0.5 to 8.0(kHz)
*4. The feedback input to input terminals A and B and the feedback input to option cassette RX2-PG are necessary.
High-function General-purpose Inverter RX2 Series User's Manual
Parame-
Function name
ter No.
bC210
bC211
bC212
bC213
bC220
bC221
bC222
bC223
bC224
bC225
9 Communications Functions
R/W Monitor or setting data
R/W Same as bb110
R/W Same as bb111
R/W Same as bC112
R/W Same as bC113
R/W 0.00 to [bC222] (Hz)
R/W Same as bC121
R/W [bC220] to [bC224] (Hz)
R/W Same as bC123
R/W [bC222] to 590.00 (Hz)
R/W Same as bC125
Resolution
0.1(A)
-
-
1(s)
0.01(Hz)
0.1(A)
0.01(Hz)
0.1(A)
0.01(Hz)
0.1(A)
9
9 - 71