Omron RX2 Series User Manual page 210

4 Test Run
 Parameter
Item
Simulation mode enable
Error code selection for Alarm test
Output current monitor optional
output enable
DC-bus voltage monitor optional
output enable
Output voltage monitor optional
output enable
Output torque monitor optional
output enable
Start with frequency matching
optional Setting enable
Output current monitor optional
output value setting
DC-bus voltage monitor optional
value output
Output voltage monitor optional
output value setting
Output torque monitor optional
output value setting
Start with frequency matching
optional value setting
*1. On the parameter about the current and the voltage, the figures and the units to be handled vary in the setting
path.
1) Operator or CX-Drive: 0.1 A or 0.1 V (When CX-Drive is operated, set [CF-11] Resister data selection to 00
(A,V). When the data of [CF-11] Resister data selection is not set to 00 (A,V), it is not set or displayed correctly.)
2) Modbus: The current and the voltage vary, depending on the setting of Resister data selection [CF-11].
When [CF-11] Resister data selection is set to 00 (A,V), 0.1 A, 0.1 V
When [CF-11] Resister data selection is set to 01 (%), 0.01% (Rated ratio)
3) Drive programming: 0.01% (Rated ratio)
4 - 12
Parameter Data
[PA-20]
[PA-21] 000 to 255
[PA-22]
[PA-24]
[PA-26]
[PA-28]
[PA-30]
0.0 to 3.0
[PA-23]
× Inverter rated current (A)
200V class: 0.0 to 450.0 (Vdc)
[PA-25]
400V class: 0.0 to 900.0 (Vdc)
200V class: 0.0-300.0(V)
[PA-27]
400V class: 0.0-600.0(V)
[PA-29] -500.0 to 500.0(%)
[PA-31] 0.00 to 590.00(Hz)
High-function General-purpose Inverter RX2 Series User's Manual
Description
00 Disable
01 Enable
Issues a set error. Errors
not listed in the selection
do not occur.
00 Disable
01 Enable (Parameter setting)
02 Enable (Setting by [Ai1])
03 Enable (Setting by [Ai2])
04 Enable (Setting by [Ai3])
05 (Reserved)
06 (Reserved)
07 (Reserved)
Treats the set values as
*1
internal output values.
Treats the set values as
internal output values.
Treats the set values as
internal output values.
Treats the set values as
internal output values.
Treats the set values as
internal output values.