Polycom SoundStructure C16 Design Manual page 74

When a video codec or telephony option is selected, the corresponding output signal automatically appears
in the outputs page as well.
You can delete Channels by selecting the channel in the Channels Defined: field and clicking Remove.
Step 2 - Output Signals
In step 2 of the design process, the outputs from the system are specified in the same manner that inputs
were created. A sample collection of outputs is shown in the following figure.
A Sample Collection of Outputs In SoundStructure Studio
The outputs include audio amplifiers, recording devices, assistive listening devices, and also other
telephony or video codec systems. If the desired style of outputs is not found, select something close and
then customize the settings as described in Customizing SoundStructure Designs.
In this example, a stereo amplifier was selected as well as a mono recording output. The telephone and
Polycom Video Codec conferencing system outputs were automatically created when their respective inputs
were added to the system. Notice that there are multiple audio channels associated with the Polycom Video
Codec. See Connecting Over Conference Link2 for additional information.
Polycom, Inc. 74