Polycom SoundStructure C16 Design Manual page 356

Hide thumbs Also See for SoundStructure C16:

Table of Contents

1 In the SoundStructure VoIP Interface Network settings on the Wiring Page, set the DHCP boot

server to Static and set the Provisioning Server Settings to use an FTP Server and enter the

appropriate server address, username, and password.

2 Copy the new software file to the directory specified in step 7 of installing the FTP server. The

software file will have a name of the form 3111-33215-001.sip.ld where 3111-33215-001 is the part

number associated with the SoundStructure VoIP Interface software.

3 Copy the file 000000000000.cfg file to the directory specified in step 7 of installing the FTP server.

This configuration file tells the SoundStructure VoIP Interface which firmware file to look for when it

connects to the FTP server. The contents of this configuration file must have at least the information

Polycom, Inc.

Troubleshooting