Polycom SoundStructure C16 Design Manual page 651

Limiter Threshold—dp_lim_thresh
Argument Argument value
Channel Type Virtual Channel
Value Type Floating-Point
Read/Write Mode Read/Write
Phys Chans Conferencing Mic/Line Input, Conferencing Line Output, Sound Reinforcement Mic/Line
Input, Sound Reinforcement Line Output, Analog Telephony Input, Analog Telephony Output,
Submix, ConferenceLink Aux Input, ConferenceLink Aux Output
Virt Chans Mono, Stereo
System Limits Minimum: -100.0, Maximum: 0.0, Resolution: 0.1
Default 0.0
User Limits No
Supported
Event Source No
Description
This parameter sets the RMS level (in dBFS) of the input signal above which the limiter engages.
Enable Peak Limiter—dp_peak_en
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read/Write
Phys Chans Conferencing Mic/Line Input, Conferencing Line Output, Sound Reinforcement Mic/Line
Input, Sound Reinforcement Line Output, Analog Telephony Input, Analog Telephony Output,
Submix, ConferenceLink Aux Input, ConferenceLink Aux Output
Virt Chans Mono, Stereo
Default 0
Event Source No
Description
This parameter enables (1) or disables (0) the peak limiter function of the dynamics processor. This
parameter and dp_en must be enabled for the peak limiter to function.
Polycom, Inc. 651