Polycom SoundStructure C16 Design Manual page 580

Examples
Command
set phone_flash "Phone
Out"
Set Flash Delay—phone_flash_delay
Argument Argument value
Channel Type Virtual Channel
Value Type Integer
Read/Write Mode Read/Write
Phys Chans Analog Telephony Output
Virt Chans Mono
System Limits Minimum: 100, Maximum: 5000
Default 100
User Limits No
Supported
Event Source No
Description
This parameter sets the delay (in milliseconds) for the phone_flash parameter. Note that by default, PSTN
interfaces use the flash delay determined by their pstn_country setting. However, they can use the value of
this parameter if the pstn_flash_delay_override parameter is set to 1.
Polycom, Inc.
Response
val phone_flash "Phone
Out"
Description
Flashes the phone interface associated with the virtual
channel "Phone Out" to -6dB. Note that the phone out
virtual channel name must be used, not the phone in
virtual channel name.
580