Polycom SoundStructure C16 Design Manual page 690

Get Ethernet MAC
Argument Argument value
Channel Type Device-Specific System
Value Type String
Read/Write Mode Read-Only
System Limits Max String Length: 17
Event Source No
Description
This parameter gets the MAC address for the system's Ethernet port. The value will be formatted in all
lowercase with bytes separated by a colon, for example "00:04:f2:bf:00:01".
Examples
Command
get eth_mac 1
Key Pressed On IR
Argument Argument value
Channel Type Virtual Channel
Value Type Integer
Read/Write Mode Read-Only
Phys Chans Infrared Remote Input
Virt Chans Control
System Limits Minimum: 0, Maximum: 255
Event Source No
Description
When queried, this parameter returns the keycode value of the last key that was pressed on the IR remote.
As an event, a status message is generated whenever a key is pressed on the IR remote.
Polycom, Inc.
Address—eth_mac
Response
val eth_mac 1
"00:04:f2:bf:00:01"
Remote—ir_key_press
Description
Queries the Ethernet mac address on device 1.
690