Polycom SoundStructure C16 Design Manual page 691

Key Held On IR Remote—ir_key_held
Argument Argument value
Channel Type Virtual Channel
Value Type Integer
Read/Write Mode Read/Write
Phys Chans Infrared Remote Input
Virt Chans Control
System Limits Minimum: 0, Maximum: 255
Event Source No
Description
When queried, this parameter returns the keycode value of the last key that was held on the IR remote. As
an event, a status message is generated at an interval of approximately 100 ms whenever an key is held
on the IR remote.
Set IR Remote Channel
Argument Argument value
Channel Type Virtual Channel
Value Type Integer
Read/Write Mode Read/Write
Phys Chans Infrared Remote Input
Virt Chans Control
System Limits Minimum: 0, Maximum: 15
Default 3
User limits No
Supported
Event Source No
Description
This parameter sets the channel ID that the specified IR input will respond to.
Polycom IR remotes can be configured to use different channel IDs so that multiple remotes can be used in
the same room to control different equipment without interfering with each other. By default, the Polycom IR
Polycom, Inc.
ID—ir_chan_id
691