Installing The New Plugin Cards - Polycom SoundStructure C16 Design Manual

on, select Overwrite preset "Power-On". If you want to save your settings to a new preset, select
Save settings to a new preset. If you don't need to save your changes, select Discard current
settings.
6 Once the firmware has been updated, the SoundStructure system will automatically reboot and
SoundStructure Studio will display the Connect to Devices dialog. Close the Connect to Devices
dialog and wait for the SoundStructure system to reboot. The SoundStructure front panel light will
blink green while the system is booting and will turn solid green when the system has finished
rebooting.

Installing the New Plugin Cards

Once the SoundStructure system has the appropriate firmware loaded, the next step is to power down the
system and install (or replace) the plug-in cards with the newly selected cards.
Power Down the System
To power down the system, remove the power cord from the rear of the SoundStructure system. If there are
multiple devices in a system, remove power from all the devices.
Polycom, Inc. 324