Polycom SoundStructure C16 Design Manual page 73

For more information on integration with table and ceiling microphones, see the Best Practices Guide:
Polycom SoundStructure and Polycom Microphones.
The choices for Hybrids/Codecs include the Polycom Video Codec, the Polycom VSX series, and a generic
mono or stereo video codec. When the Polycom Video Codec is selected, it is assumed that the Polycom
Video Codec connects to the SoundStructure device over the Conference Link2 interface. To use the
Polycom Video Codec with the SoundStructure devices via the analog input and output instead of
Conference Link requires selecting a different codec such as the VSX8000 stereo codec. Connecting Over
Conference Link2 provides additional information about integrating with the Polycom Video Codec over the
Conference Link2 interface.
A typical system is shown in the next figure where a stereo program audio source, eight table microphones,
a wireless microphone, a telephony input, and a Polycom Video Codec have been selected.
Example Project Created in SoundStructure Studio
The graphic icon next to the signal name in the Channels Defined: field indicates whether the virtual channel
is a monaural channel that is defined with one physical channel (a dot with two waves on one side) or a
stereo virtual channel that is defined with two physical channels (a dot with two waves on both sides).
When a Polycom Video Codec is selected, there are multiple audio channels that are created automatically
and used independently in the SoundStructure matrix. See Connecting Over Conference Link2 for
additional information on the audio channels and the processing that is available on these channels.
Polycom, Inc. 73