Polycom SoundStructure C16 Design Manual page 602

VoIP Interface Ethernet
Argument Argument value
Channel Type Virtual Channel
Value Type String
Read/Write Mode Read/Write
Phys Chans VoIP Telephony Input
Virt Chans Mono
System Limits Max String Length: 256
Default mode='dhcp'
Event Source No
Description
This parameter gets or sets the Ethernet settings for the VoIP interface. The system must be rebooted for
the Ethernet settings to take effect.
The format of the string is a comma-separated list of name/value pairs with the name and value separated
by an equals character, and the value enclosed in single quotes.
The mode attribute is always required. It must be either dhcp or static.
The addr, dns, gw, and nm attributes are required when mode is static and ignored (not required) when
mode is dhcp. They are always returned in the acknowledgement. For the dhcp case, they specify the
values obtained from the DHCP server.
The addr attribute specifies the IP address of the interface. The dns attribute specifies the domain name
server(s). A single server or multiple servers (separated by spaces) may be specified. The gw attribute
specifies the gateway. The nm parameter specifies the netmask.
DHCP Example
set voip_eth_settings "VoIP In" "mode='dhcp'"
val voip_eth_settings "VoIP In" "mode='dhcp',addr='172.22.2.129',dns='172.22.1.1
172.22.1.2',gw='172.22.2.254',nm='255.255.255.0'"
Static IP Example
set voip_eth_settings "VoIP In"
"mode='static',addr='172.22.2.200',dns='172.22.1.1',gw='172.22.2.254',nm='255.255.255.0'"
val voip_eth_settings "VoIP In"
"mode='static',addr='172.22.2.200',dns='172.22.1.1',gw='172.22.2.254',nm='255.255.255.0'".
Polycom, Inc.
Settings—voip_eth_settings l
602