Polycom SoundStructure C16 Design Manual page 319

5 In Create a Project - Step 3, select the SoundStructure equipment required to implement this
project. By default SoundStructure Studio will select the lowest cost equipment that will meet the
design requirements. In this example, the equipment required is a SoundStructure C12 and a
SoundStructure VoIP Interface as shown in the following figure.
Click Next to continue to the next step.
6 In Create A Project - Step 4, you can either send the project directly to the SoundStructure system or
to continue to work off line (default). Polycom recommends you continue to work offline and click
Finish to complete the project and remain offline.
Polycom, Inc. 319