Polycom SoundStructure C16 Design Manual page 558

Examples
Command
set fader "Amplifier" 1
get fader "Amplifier"
set fader max "Amplifier"
10
set fader min "Amplifier"
-15
inc fader "Amplifier" 2
inc fader "Amplifier" 0.5
dec fader "Amplifier" 2.5
Line Output Gain—line_out_gain
Argument Argument value
Channel Type Virtual Channel
Value Type Floating-Point
Read/Write Mode Read/Write
Phys Chans Conferencing Line Output, Sound Reinforcement Line
Output
Virt Chans Mono, Stereo
System Limits Minimum: -100.0, Maximum: 20.0, Resolution: 0.5
Default 0.0
User Limits No
Supported
Event Source No
Polycom, Inc.
Response
val fader "Amplifier" 1
val fader "Amplifier" 1
val fader max "Amplifier"
10
val fader min "Amplifier"
-15
val fader "Amplifier" 3
val fader "Amplifier" 3.5
val fader "Amplifier" 1
Description
Sets the fader on the "Amplifier" virtual channel to 1.
Returns the current value of the fader on the "Amplifier"
virtual channel.
Sets the maximum fader value to +10 on the "Amplifier"
virtual channel. Any commands to set the fader above
+10 will have the value set to 10.
Sets the minimum fader value to -15 on the "Amplifier"
virtual channel. Any commands to set the fader below -15
will have the value set to -15.
Increments the current value of the fader by 2dB on the
"Amplifier" virtual channel and returns the current value
of the fader.
Increments the current value of the fader by 0.5dB on the
"Amplifier" virtual channel and returns the current value
of the fader.
Decrements the current value of the fader by 2.5dB on
the "Amplifier" virtual channel and returns the current
value of the fader.
558