Polycom SoundStructure C16 Design Manual page 341

Configuring a Line Registration
To configure a line registration, navigate to the Settings > Lines option and select a line. The line settings
appear as shown next.
Line Registration
Enter the information as described in the table below.
Identification Settings
Name Possible Values
Display Name Any string up to 256
characters
Address Any string up to 256
characters
Authentication Any string up to 256
User ID characters
Authentication Any string up to 256
Password characters
Polycom, Inc.
Description
The display name used in SIP signaling that your phone uses as
the default caller ID. This name is displayed on the call recipient's
phone.
Enter a line identification address that the phone uses to register
with the server. The address may include a user name, or the
host of the phone's SIP URI. For example, if the phone's line is
1002@polycom.com, enter 1002 as the SIP where polycom.com
is the server. Or, you can enter 1002@polycom.com. Any
address entered will be displayed as the phone's line if the
display name and label are not specified.
Enter the user name used to authenticate this line registration (if
applicable).
Enter the password used to authenticate this line registration (if
applicable).
341