Polycom SoundStructure C16 Design Manual page 230

Hide thumbs Also See for SoundStructure C16:

Table of Contents

Once the contents have been added to the preset, ensure the 'Save Selected' button is pressed to ensure

the preset contents are saved with the configuration file. Navigating away from the partial preset prior to

saving removes all the entries from the partial preset.

Note: Saving Partial Presets

To save the partial preset after adding commands, select the 'Save Selected'

Creating Partial Presets with the Preset Recorder

You may record partial presets with the partial preset recorder tool found under the Tools Menu and with the

Record Preset button on the Preset page.

The recorder, as shown below, has the following features listed in the table below.

Preset Recorder

Recorder Control Features

Start Recording

Pause Recording

Stop Recording

Starting Preset

Redo Last Command

Undo Last Command

Last Command Recorded

Number of Commands

Once recorded, the presets are available for review and manual editing in the Presets page.

Polycom, Inc.

All UI interaction after starting the recording is stored to a partial preset.

Temporarily stops recording commands.

Finishes the partial preset recording.

You can either record a new preset or append to an existing preset

depending on the value of this field

Redoes a command that was undone with the Undo button.

Undoes the last command recorded so it is not part of the preset.

Shows the last command that was recorded.

Shows the number of commands that have been recorded with the partial

Troubleshooting