Polycom SoundStructure C16 Design Manual page 573

Examples
Command
set
phone_auto_answer_en
"Phone In" 1
Connect Or Disconnect Telephony
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read/Write
Phys Chans Analog Telephony Output, VoIP Telephony Output
Virt Chans Mono
Default 0
Event Source Yes
Description
This parameter sets the connection status of the telephony interface. Setting the phone_connect status to
1 connects the call, while setting it to 0 disconnects the call.
Examples
Command
set phone_connect
"Phone Out" 1
get phone_connect
"Phone Out" 0
Polycom, Inc.
Response
val
phone_auto_answer_en
"Phone In" 1
Interface—phone_connect
Response
val phone_connect
"Phone Out" 1
val phone_connect
"Phone Out" 0
Description
Sets the phone associated with the virtual channel
"Phone In" to autoanswer when the phone rings. Note
that the phone in virtual channel name must be used, not
the phone output virtual channel name.
Description
Takes the phone output channel "Phone Out" offhook.
Note that the phone out virtual channel name must be
used, not the phone input virtual channel name.
Hangs up the phone line associated with the virtual
channel "Phone Out". Note that the phone out virtual
channel name must be used, not the phone input virtual
channel name.
573