Polycom SoundStructure C16 Design Manual page 199

Hide thumbs Also See for SoundStructure C16:

Table of Contents

Design Guide for Polycom SoundStructure Studio C16, C12, C8, and SR12

Codec 1 is connected to the master SoundStructure (Bus ID 1), Codec 2 is connected to the SoundStructure

with Bus ID 2, and Codec 3 is connected to the SoundStructure with bus ID 3.

Specifications

includes details for the pin outs of the Clink2 cable required to connect between the Polycom

Video Codec and SoundStructure devices.

Digitally Connecting Polycom Video Codecs

As described in

Connecting Over Conference

sends a command to mute the virtual channel or group with the name "Mics". When using multiple Polycom

Video Codecs over Clink2, if any Polycom Video Codec is told to mute via a button press on a microphone,

an IR key press, or a control system command to the Polycom Video Codec, then the channels defined by

"Mics" are muted within SoundStructure. Volume up and volume down operate in a similar manner when

any Polycom Video Codec receives a volume up or volume down command, the SoundStructure receives

a command to adjust the fader of the "Amplifier" virtual channel.

If multiple Polycom Video Codecs are being used independently within a SoundStructure system, ensure

that the SoundStructure system does not include virtual channel names "Mics" or "Amplifier" or if those

names are used, ensure that they are defined in such a way that the system operates as desired. An easy

way to customize the definition of "Mics" and "Amplifier" virtual channels is to define submixes with the name

Polycom, Inc.

PIN 5: GROUND

REMOTE CONTROL 1

REMOTE CONTROL 2

PIN 5: GROUND

REMOTE CONTROL 1

REMOTE CONTROL 2

PIN 5: GROUND

REMOTE CONTROL 1

REMOTE CONTROL 2

Link2, when a Polycom Video Codec is muted, the codec

SoundStructure Studio 1.9.0

Troubleshooting