Polycom SoundStructure C16 Design Manual page 358

Note: Turning off Windows Firewall to Run a FTP or HTTP Server
To run either an FTP or HTTP server on your local PC, you will have to temporarily
turn off or open the appropriate ports on your Windows Firewall. If you do not allow
traffic through your Windows Firewall, or make exceptions to allow the FTP or
HTTP traffic, your SoundStructure VoIP Interface will not be able to reach your PC's
FTP or HTTP server and you will not be able to update the software on your
SoundStructure VoIP Interface. After the software has been updated, you can turn
your firewall back on or close any ports you opened.
Downloading and Installing an HTTP Web Server
A free and popular Web server, Apache Server, is available for 32-bit Windows at
http://httpd.apache.org/download.cgi#apache22
Software. To set up the Web server:
1 Download and install the latest version of Apache Server from
http://httpd.apache.org/download.cgi#apache22.
2 After installation test that the web server works by opening your browser and entering in the IP
address of your PC. If successful you should see a page with the text "It works".
3 Edit the httpd.conf file that by default will be installed in the c:\Program Files\Apache Software
Foundation\Apache2.2\conf directory and set the DocumentRoot entry to point to the directory
where you would like to have the software files, for example enter c:/http/files for the Windows
directory of c:\http\files.
Using a Web Server with Web Configuration Utility Software Upgrade
To use the Web Configuration Utility Software Upgrade feature, follow these steps:
Polycom, Inc.
and version 2.2.19 has been tested with the Polycom UC
358