Polycom SoundStructure C16 Design Manual page 603

Set VLAN ID for the VoIP
Argument Argument value
Channel Type Virtual Channel
Value Type Integer
Read/Write Mode Read/Write
Phys Chans VoIP Telephony Input
Virt Chans Mono
System Limits Minimum: -1, Maximum : 4096
Default -1
User Limits No
Supported
Event Source No
Description
This parameter sets the VLAN ID for the VoIP card. A value of -1 corresponds to "disabled."
Reset VoIP Interface to Factory
Argument Argument value
Channel Type Virtual Channel
Value Type Void
Read/Write Mode Write-Only
Phys Chans VoIP Telephony Input
Virt Chans Mono
Event Source No
Description
This parameter resets the VoIP plug-in card to its factory state.
to "disabled."
Polycom, Inc.
Interface—voip_eth_vlan_id
State—voip_factory_reset
l
l
603