Polycom SoundStructure C16 Design Manual page 207

Hide thumbs Also See for SoundStructure C16:

Table of Contents

Select the device to upload the file to and select Send configuration to devices and Connect. The Send

configuration to devices option is only enabled if there is a valid configuration file open in SoundStructure

Connecting to a SoundStructure Device

If the Serial control is checked, the system also searches for devices over the RS-232 interface as shown

in the following figure. Any discovered devices are displayed and the baud-rate and flow control settings

required to connect to those devices are displayed.

Polycom, Inc.

Troubleshooting