Polycom SoundStructure C16 Design Manual page 581

Ignore an Incoming
Argument Argument value
Channel Type Virtual Channel
Value Type Void
Read/Write Mode Write-Only
Phys Chans Analog Telephony Output, VoIP Telephony Output
Virt Chans Mono
Event Source No
Description
This parameter causes the incoming call to be ignored. The incoming ring tones will be silenced on the local
side, but the remote caller will still hear ringing. Taking the phone offhook when there is an incoming ignored
call will cause the incoming call to be answered.
Redial The Last Number On The Telephony
Argument Argument value
Channel Type Virtual Channel
Value Type Void
Read/Write Mode Write-Only
Phys Chans Analog Telephony Output, VoIP Telephony Output
Virt Chans Mono
Event Source No
Description
Setting this parameter causes the last number to be redialed on the telephony interface. The last number is
defined as all the digits that were dialed since the telephony interface was last connected (see the
phone_connect parameter). If the telephony interface is not already connected, setting this parameter will
automatically connect it before dialing.
Polycom, Inc.
Call—phone_ignore
Interface—phone_redial
581