Mitsubishi Electric MELSERVO-J4 Series Instruction Manual page 614

Setting value Output item
16 Servo motor-side/load-side speed deviation
17 Internal temperature of encoder
(10 V/128 )
*1 Encoder pulse unit.
*2 Available in position mode
*3 This cannot be used in the torque mode.
*4 For 400 V class servo amplifier, the bus voltage becomes +8 V/800 V.
*5 This cannot be used in the velocity mode.
*6 Output in the load-side encoder unit for the fully closed loop control. Output in the servo motor encoder unit for the semi closed loop
control.
*7 For details on the value of the maximum current command (maximum torque) for ±8 V, refer to the following.
Page 614 Maximum current command (maximum torque) for analog monitor ±8 V
APPX
612
Appendix 9 Analog monitor
Description
CCW direction
8 [V]
Maximum speed
0
Maximum speed
-8 [V]
CW direction
10 [V]
-128 [°C]
0
128 [°C]
-10 [V]