Mitsubishi Electric MELSERVO-J4 Series Instruction Manual page 572

Cc-link ie field network interface servo amplifier instruction manual (motion mode)
Hide thumbs Also See for MELSERVO-J4 Series:
Table of Contents

Advertisement

■Transportation of lithium metal batteries packed with or contained in equipment
• For batteries packed with equipment, follow the necessary requirements of UN3091 PI969. Batteries are classified into
either Section /Section  depending on the lithium content/packaging requirements.
• For batteries contained in equipment, follow the necessary requirements of UN3091 PI970. Batteries are classified into
either Section /Section  depending on the lithium content/packaging requirements. The special handling may be
unnecessary depending on the number of batteries and gross mass per package.
Ex.
Mitsubishi label withbattery illustration
(Available until December 31, 2018)
The handling label shown in the figure in the left has been changed to the one shown in the figure in the right in accordance
with the IATA Dangerous Goods Regulations 58th Edition (effective January 1, 2017).
However, the label shown in Fig. app. 1 may be used until December 31, 2018 (for two years as an interim measure).
■Details of the package change
The following caution is added to the packages of the target batteries.
"Containing lithium metal battery. Regulations apply for transportation."
■Transportation precaution for customers
For sea or air transportation, the handling label (refer to the example above) must be attached to the package of a Mitsubishi
cell or battery. In addition, attaching it to the outer package containing several packages of Mitsubishi cells or batteries is also
required. When the content of a package must be handled as dangerous goods (Class 9), the Shipper's Declaration for
Dangerous Goods is required, and the package must be compliant with Class 9 Packages. Documentations like the handling
label in the specified design and the Shipper's Declaration for Dangerous Goods are required for transportation. Please attach
the documentations to the packages and the outer package.
The IATA Dangerous Goods Regulations are revised, and the requirements are changed annually. When customers transport
lithium batteries by themselves, the responsibility for the cargo lies with the customers. Thus, be sure to check the latest
version of the IATA Dangerous Goods Regulations.
APPX
570
Appendix 2 Handling of AC servo amplifier batteries for the United Nations Recommendations on the Transport of Dangerous Goods
* Place for UN number (s)
** Place for telephone number for additional information
Mitsubishi label with battery illustration
(Available from January 1, 2017)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents