Transportation And Storage - Mitsubishi Electric MELSERVO-J4 Series Instruction Manual

Transportation and storage

CAUTION
• Transport the products correctly according to their mass.
• Stacking in excess of the limited number of product packages is not allowed.
• For detailed information on transportation and handling of the battery, refer to the following.
Page 569 Handling of AC servo amplifier batteries for the United Nations Recommendations on the Transport of Dangerous Goods
Page 571 Symbol for the new EU Battery Directive
• Install the product in a load-bearing place of servo amplifier and servo motor in accordance with the instruction manual.
• Do not put excessive load on the machine.
• Do not hold the front cover, cables, or connectors when carrying the servo amplifier. Otherwise, it may drop.
When you keep or use it, please fulfill the following environment.
Item
Ambient Operation []
temperature
Transportation []
Storage []
Ambient Operation, transportation, storage
humidity
Vibration Test condition
resistance
Operation
Transportation
Storage
Pollution degree
IP rating
Altitude Operation, storage
Transportation
*1 In regular transport packaging
APPX
582
Appendix 4 Compliance with global standards
Environment
0 to 55 Class 3K3 (IEC/EN 60721-3-3)
*1
-20 to 65 Class 2K4 (IEC/EN 60721-3-2)
*1
-20 to 65 Class 1K4 (IEC/EN 60721-3-1)
5 %RH to 90 %RH
10 Hz to 57 Hz with constant amplitude of 0.075 mm
57 Hz to 150 Hz with constant acceleration of 9.8 m/ to IEC/EN 61800-5-1 (Test Fc of IEC 60068-2-6)
5.9 m/
*1
Class 2M3 (IEC/EN 60721-3-2)
Class 1M2 (IEC/EN 60721-3-2)
2
IP20 (IEC/EN 60529), Terminal block IP00
Open type (UL 50)
Max. 2000 m above sea level
Max. 10000 m above sea level