Mitsubishi Electric MELSERVO-J4 Series Instruction Manual page 46

■MR-J4-350GF(-RJ)
The diagram shows MR-J4-350GF-RJ.
The broken line area is the same as
MR-J4-200GF(-RJ) or less.
(1)
(3)
(2)
Side
(4)
(5)
(7)
(6)
No. Name/Application
(1) Main circuit power connector (CNP1)
Connect the input power supply.
(2) Rating plate
(3) Servo motor power output connector (CNP3)
Connect the servo motor.
(4) Control circuit power connector (CNP2)
Connect the control circuit power supply and regenerative option.
(5) Charge lamp
When the main circuit is charged, this will light. While this lamp is lit, do not reconnect the cables.
(6) Protective earth (PE) terminal
(7) Battery holder
Install the battery for absolute position data backup.
1 FUNCTIONS AND CONFIGURATION
44
1.7 Structure
Detailed explanation
Page 83 Connection example of power
circuit
Page 98 Explanation of power supply
system
Page 41 Model designation
Page 83 Connection example of power
circuit
Page 98 Explanation of power supply
system

Page 83 Connection example of power
circuit
Page 98 Explanation of power supply
system
Page 384 Battery