Appendices - Mitsubishi Electric MELSERVO-J4 Series Instruction Manual

APPENDICES

Appendix 1
The DC power supply input is available only with the MR-J4-_GF-RJ servo amplifiers.
Connection example
CAUTION
• Ensure that polarity (+/-) is correct. Otherwise, a burst, damage, etc., may occur.
For the signal and wirings not given in this section, refer to the following.
Page 84 200 V class
Page 90 400 V class
When using the servo amplifier with the
DC power supply input
Appendix 1 When using the servo amplifier with the DC power supply input
A
APPX
563