Test Operation Mode In Mr Configurator2 - Mitsubishi Electric MELSERVO-J4 Series Instruction Manual

Test operation mode in MR Configurator2

CAUTION
• The test operation mode is designed for checking servo operation. It is not for checking machine operation. Do not use this mode with the machine. Always
use the linear servo motor alone.
• If the servo motor operates abnormally, use EM2 (Forced stop 2) to stop it.
• The content described in this section indicates the environment where the servo amplifier and a personal
computer are directly connected.
• When the test operation mode is selected with the test operation select switch (SW1-1), the network
communication for the servo amplifier and later shut off.
By using a personal computer and MR Configurator2, you can execute the positioning operation, the output signal (DO)
forced output, and the program operation without connecting the controller.
Test operation mode types
■Positioning operation
Positioning operation can be performed without the controller. Use this operation with the forced stop reset. This operation
may be used independently of whether the servo is on or off and whether the controller is connected or not.
Perform on the positioning operation screen of MR Configurator2.
• Operation pattern
Item
Travel distance [pulse]
Speed [mm/s]
Acceleration/deceleration time constant [ms]
Repeat pattern
Dwell time [s]
Number of repeats [time]
• Operation method
Operation
Positive direction travel
Negative direction travel
Pause
Stop
Forced stop
14 USING A LINEAR SERVO MOTOR
484
14.3 Operation and functions
Initial value
1048576
10
1000
Positive direction travel  Negative direction travel
2.0
1
Screen control
Click "Positive Direction Movement".
Click "Reverse Direction Movement".
Click "Pause".
Click "Stop".
Click "Forced stop".
Setting range
0 to 99999999
0 to Maximum speed
0 to 50000
Positive direction travel  Negative direction travel
Positive direction travel  Positive direction travel
Negative direction travel  Positive direction travel
Negative direction travel  Negative direction
travel
0.1 to 50.0
1 to 9999