XT55 AVL User's Guide
Confidential/Released
On the appeared window thick the check box with caption Send line ends with line feeds.
Next, open a text file and write the desired command (see Figure 8). Please note that after
the command is written, the enter key needs to be pressed in order to complete the NMEA
command (<CR><LF>), else the command will be ignored from the XT55 module. To save
the active document to its current name and directory just open File menu and click Save
item. Then close the current file.
XT55_avl_ug_V03
Figure 7: ASCII setup
Figure 8: Example of an extended NMEA command
Page 12 of 37
s
m
o b i l e
28.06.2004