Alarm messages
34 Mbit/s extension board failure
...................................................................................................................................................................................................................................
Alarm identifier
Information
ASAP
Alarm severity
(default setting)
Reporting state
(default setting)
Alarm category
Local indications
Cause
Actions
Note(s)
...................................................................................................................................................................................................................................
1-36
E31XcUPF
The 34 Mbit/s extension board (X2E3-V2) is defective.
equipment
Prompt
Reported
Equipment
The red fault LED on the unit is lit.
A hardware failure of the 34 Mbit/s extension is detected.
Remove the 34 Mbit/s extension board and replace it with another one.
As there is no equipment protection of the 34 Mbit/s extension board,
E31XcEQF and E31XcUPF are always reported simultaneously as a reminder
that a hardware failure is service affecting.
Alcatel-Lucent - Proprietary
See notice on first page
365-312-803R7.2
Issue 4, May 2007