Alcatel-Lucent 1643 AMS Operation Manual page 316

Alarm messages
VC-4 Payload mismatch
...................................................................................................................................................................................................................................
Alarm identifier
Information
Alarm category
ASAP
Alarm severity
(default setting)
Reporting state
(default setting)
Local indications
Cause
Actions
...................................................................................................................................................................................................................................
1-296
VC4cPLM
The received payload value, used to indicate the composition of the VC-4
payload, does not match the provisioned value.
Transmission
sdhHOPath
Prompt
Reported
In the reporting Network Element:
•
In the upstream direction, "VC-4 Remote Defect Indicator" is activated.
•
In the downstream direction, the alarm indication signal is inserted into the
next function.
Payload composition of VC-4 at the network element that reported the alarm is
not the same as the payload composition of VC-4 at its far-end station.
If the received payload label is >=1, check if the mapping mode of the local
and far-end network elements is the same.
Alcatel-Lucent - Proprietary
See notice on first page
365-312-803R7.2
Issue 4, May 2007