Alcatel-Lucent 1643 AMS Operation Manual page 314

Alarm messages
VC-4 Network connection server signal fail
...................................................................................................................................................................................................................................
Alarm identifier
Information
Alarm category
ASAP
Alarm severity
(default setting)
Reporting state
(default setting)
Local indications
Cause
Actions
...................................................................................................................................................................................................................................
1-294
VC4cSSF
This alarm signals that the VC-4 Connection is unavailable due to faults in the
serving section layer, as indicated by the reception of the alarm indication
signal at the high order path layer. This can occur when the section layer and
higher order path layer are managed separately.
Transmission
sdhHOPath
Information
Reported
–
One or more STM-1 or MS faults in this or upstream nodes.
This alarm message is always raised as a consequence of one or more
equipment and/or transmission faults. Refer to the description of the
corresponding alarm messages.
Alcatel-Lucent - Proprietary
See notice on first page
365-312-803R7.2
Issue 4, May 2007