Alarm messages
X21 interface loss of input signal
...................................................................................................................................................................................................................................
Alarm identifier
Information
Alarm category
ASAP
Alarm severity
(default setting)
Reporting state
(default setting)
Local indications
Cause
Actions
...................................................................................................................................................................................................................................
365-312-803R7.2
Issue 4, May 2007
X21cLOS
There is no input signal at the corresponding X.21 port.
Transmission
ethPS
Prompt
Reported
The red "Fault" LED is lit.
Possible causes may be a cable break or wrong physical connections for
example.
Check the cabling.
Alcatel-Lucent - Proprietary
See notice on first page
1-323