Alarm messages
P12s Network connection server signal fail egress
...................................................................................................................................................................................................................................
Alarm identifier
Information
Alarm category
ASAP
Alarm severity
(default setting)
Reporting state
(default setting)
Cause
Actions
...................................................................................................................................................................................................................................
365-312-803R7.2
Issue 4, May 2007
P12SgcSSF
The 2-Mbit/s connection is unavailable due to faults in the serving section
layer, as indicated by the reception of the alarm indication signal at the higher
order path layer (SDH -> PDH). This can occur when the section layer and
higher order path layer are managed separately.
Transmission
pdhPath
Information
Reported
One or more VC-12 or MS faults in this or upstream network elements.
This message is always raised as a consequence of one or more equipment
and/or transmission faults. Clear these alarms first.
Alcatel-Lucent - Proprietary
See notice on first page
1-111