Alcatel-Lucent 1643 AMS Operation Manual page 319

Alarm messages
VLAN configuration mismatch
...................................................................................................................................................................................................................................
Alarm identifier
Information
Alarm category
ASAP
Alarm severity
(default setting)
Reporting state
(default setting)
Local indications
Cause
Actions
Note(s)
...................................................................................................................................................................................................................................
365-312-803R7.2
Issue 4, May 2007
MACcVCM
VLAN configuration mismatch
Transmission
ethPath
Prompt
Reported
–
Different customers on one unit have the same customer ID or the same VLAN
ID is being used on different virtual switches in one unit.
Re-plan the network to avoid this configuration mismatch.
It is not permitted to provision a VLAN which is currently in use in another
virtual switch on the same data unit.
The required service cannot operate successfully.
Alcatel-Lucent - Proprietary
See notice on first page
1-299