Alarm messages
2 Mbit/s Excessive FAW bit error rate egress
...................................................................................................................................................................................................................................
Alarm identifier
Information
Alarm category
ASAP
Alarm severity
(default setting)
Reporting state
(default setting)
Cause
Actions
...................................................................................................................................................................................................................................
365-312-803R7.2
Issue 4, May 2007
PFgcEXC
2 Mbit/s signal degrade protected (SDH -> PDH). The block error rate of an
incoming 2 Mbit/s signal exceeds an error threshold in a protected
configuration.
Transmission
pdhPath
Prompt
Reported
Fault(s) in upstream external cabling or equipment.
Check upstream external cabling and equipment.
Alcatel-Lucent - Proprietary
See notice on first page
1-25