M12 Connector In The Basic Device; M12 Connector For Connection Of The Outputs Of The Alarm Module 6Dr4004-6A / -8A (- Z D55) - Siemens SIPART PS2 Operating Instructions Manual

Connect
5.2 Electrical wiring
View of the mating side pole pattern
5.2.6.1

M12 connector in the basic device

You have a positioner 6DR55..-0.R.. or 6DR55..-0.S. In this case the M12 connector is
connected to the bus circuit of the basic electronics.
Table 5-1
Bus circuit terminal
7
Shield support of housing
6
5.2.6.2 M12 connector for connection of the outputs of the alarm module 6DR4004-6A / -8A (-Z
D55)
You have a positioner with order suffix -Z order code D55. This version of the positioner is
connected via an M12 connector to the current output of the position feedback module.
Table 5-2
Alarm output terminal
41 (+)
52 (-)
42 (-)
51 (+)
94
Assignment diagram
Assignment diagram
Pole designation Wire color of M12
connector
1 Brown
4 Black
3 Blue
2 White
Pole designation
1 - Brown
4 - Black
3 - Blue
Pole designation
1 - Brown
4 - Black
3 - Blue
2 - White
SIPART PS2 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00127926-AB