Certificates, Approvals, Explosion Protection - Siemens SIPART PS2 Operating Instructions Manual

13.5

Certificates, approvals, explosion protection

Certificates and approvals
Classification according to pressure equip‐
ment directive (PED 97/23/EC)
CE conformity
Explosion protection
Explosion protection
Explosion protection in accordance with
Flameproof enclosure encapsulation "d",
"XP" 6DR5..5/6
Intrinsic safety "i", "IS"
● 6DR5..0/1/2/3
● 6DR5..1/2/3
Non-sparking "nA", "NI"
Dust, protection by means of enclosure "t",
"DIP"
● 6DR5..1-.D/K...
● 6DR5..2-.D/K...
● 6DR5..3-.D/K...
● 6DR5..6-.E...
Breakdown of the article numbers for assignment of the maximum permissible ambient temperature
ranges
6DR5ayb-
a = 0, 2, 5, 6
y = 1, 2
b = 0, 1, 2, 3
SIPART PS2 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00127926-AB
For fluid group 1 gases; fulfills requirements according to article 3, paragraph 3
(good engineering practice SEP)
The applicable directives and applied standards with their revision levels can be
found in the EC declaration of conformity on the Internet.
Ex markings
ATEX/IECEx
II 2 G Ex d IIC T6/T4 Gb
II 2 G Ex ia IIC T6/T4 Gb
II 3 G Ex ic IIC T6/T4 Gc
II 2 D Ex ia IIIC T110°C Db
II 3 G Ex nA IIC T6/T4 Gc
II 2 D Ex tb IIIC T100°C Db
0cdef-
c = E, G, D, F, K
d = G, N, M, P, R, S
e = 0, 1, 2, 3
f = 0, 1, 2, 3
13.5 Certificates, approvals, explosion protection
FM/CSA
FM: XP, Class I, Division 1, GP.ABCD
CSA: XP, Class I, Division 1, GP.CD
FM/CSA:
XP, Class I, Zone 1, AEx d, IIC, T6/T4
IS / I, II / 1 / A-D
IS / 1 / AEx / Ex ib / IIC, Gb
IS / III / 1 / E-G
IS / 21 / AEx / Ex ib / IIIC, Db, T110°C
NI / I / 2 / A-D
NI / 2 / AEx / Ex nA, Ex ic / IIC, Gc
DIP / II, III / 1 / E-G
DIP / 21 / AEx / Ex tb / IIIC, Db, T100°C
g..h-
g = 0, 2, 6, 7, 8
h = 0, 1, 2, 3, 4, 9
Technical data
Z jjj
A20, A40, C20, D53, D54,
D55, D56, F01, K**, L1A,
M40,
R**, S**, Y**
* = any character
287