4.7.7
EMC filter module
Function
You will require the EMC filter module if you use an external position sensor on the positioner,
e.g. a potentiometer or a non-contacting sensor. The EMC filter module forms the interface
between external position sensors and the basic electronics of the positioner. This module
protects the positioner from electromagnetic effects.
Device features
● EMC protection
● Connection to basic electronics
● Connecting terminals for an external potentiometer
Requirement
● You have an EMC filter module, article number C73451‑A430‑D23.
● The module cover is removed.
● Any already installed optional module has been removed.
A description of how to remove the module cover and install the optional modules is provided
in the section "General information about the installation of option modules (Page 54)"
SIPART PS2 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00127926-AB
Figure 4-16
EMC filter module
Installing/mounting
4.7 Installing the optional modules
73