Safety Information; Precondition For Use; Warning Symbols On The Device; Laws And Directives - Siemens SIPART PS2 Operating Instructions Manual

Safety information

2.1

Precondition for use

This device left the factory in good working condition. In order to maintain this status and to
ensure safe operation of the device, observe these instructions and all the specifications
relevant to safety.
Observe the information and symbols on the device. Do not remove any information or symbols
from the device. Always keep the information and symbols in a completely legible state.
2.2

Warning symbols on the device

Symbol
2.3

Laws and directives

Observe the test certification, provisions and laws applicable in your country during connection,
assembly and operation. These include, for example:
● National Electrical Code (NEC - NFPA 70) (USA)
● Canadian Electrical Code (CEC) (Canada)
Further provisions for hazardous area applications are for example:
● IEC 60079-14 (international)
● EN 60079-14 (EC)
2.4

Conformity with European directives

The CE marking on the device shows conformity with the regulations of the following European
guidelines:
SIPART PS2 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00127926-AB
Meaning
Consult operating instructions
2
17