Siemens SIPART PS2 Operating Instructions Manual page 241

DIAGNOSTICS_EXTENSION physical block parameter
Byt Bit No. Diagnostics events
e
0 0 1 Run time error of the ac‐
tuator
1 2 The device is not in the
"Automatic mode"
2 3 Binary 1 is active (only
message)
3 4 Action triggered by bina‐
ry input 1
4 5 Binary 2 is active (only
message)
5 6 Action triggered by bina‐
ry input 2
7 ... 21 Reserved
2 5 22 Limit for alarm A1 ex‐
ceeded
6 23 Limit for alarm A2 ex‐
ceeded
7 24 Error in the device elec‐
tronic unit
3 0 25 The device is not yet
ready for operation (not
initialized)
1 26 The device is not yet
ready for operation (initi‐
alization error)
3 27 Reserved
3 28 Reserved
4 29 Device in the Manual
mode (FB in the Manual
mode)
5 30 Device in the Simulation
mode (FEEDBACK is si‐
mulated)
6 31 Device in the TRACE
mode
7 32 Diagnostics simulation
(diagnostics events are
simulated)
33 ... Reserved
48
Effects of the event can be set using the DIAG_EVENT_SWITCH or DIAG_EVENT_SWITCH_2 parameters (default
1)
settings in this case)
SIPART PS2 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00127926-AB
Effect of the event
Quality status code
Good, Ok
Good, check function /
manual mode
Good, Ok
Good, Ok
Good, Ok
Good, Ok
-
Good, maintenance re‐
quirement
Good, maintenance re‐
quirement
Bad, maintenance re‐
quirement
Bad, maintenance re‐
quirement
Bad, maintenance re‐
quirement
-
-
-
Depends on the simula‐
ted status
-
Depends on the simula‐
ted diagnostics event
-
Functions/operations using PROFIBUS PA
10.3 Cyclic data transfer
1)
DIAGNOSTICS bit
DIA_MAINTENANCE_ALARM
DIA_FUNCTION_CHECK
DIA_MAINTENANCE_DEMAN‐
DED
DIA_FUNCTION_CHECK
DIA_MAINTENANCE_DEMAN‐
DED
DIA_FUNCTION_CHECK
-
DIA_MAINTENANCE
DIA_MAINTENANCE
DIA_MAINTENANCE_ALARM
DIA_MAINTENANCE_ALARM
DIA_MAINTENANCE_ALARM
-
-
DIA_FUNCTION_CHECK
DIA_FUNCTION_CHECK
DIA_FUNCTION_CHECK
Depends on the simulated diag‐
nostics event
-
Group
M
F
M, F, P
M, F, P
M, F, P
M, F, P
-
None, hard-co‐
ded
None, hard-co‐
ded
None, hard-co‐
ded
None, hard-co‐
ded
None, hard-co‐
ded
-
-
None, hard-co‐
ded
None, hard-co‐
ded
None, hard-co‐
ded
-
-
241