Return Procedure; Disposal - Siemens SIPART PS2 Operating Instructions Manual

12.5

Return procedure

Enclose the bill of lading, return document and decontamination certificate in a clear plastic
pouch and attach it firmly to the outside of the packaging.
Required forms
● Delivery note
● Return document (http://www.siemens.com/processinstrumentation/returngoodsnote)
● Decontamination declaration (http://www.siemens.com/sc/declarationofdecontamination)
The forms can be found on the Internet as well as in the documentation which comes with the
device.
12.6

Disposal

SIPART PS2 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00127926-AB
with the following information:
– Product (item description)
– Number of returned devices/replacement parts
– Reason for returning the item(s)
With this declaration you warrant "that the device/replacement part has been carefully
cleaned and is free of residues. The device/replacement part does not pose a hazard for
humans and the environment."
If the returned device/replacement part has come into contact with poisonous, corrosive,
flammable or water-contaminating substances, you must thoroughly clean and
decontaminate the device/replacement part before returning it in order to ensure that all
hollow areas are free from hazardous substances. Check the item after it has been cleaned.
Any devices/replacement parts returned without a decontamination declaration will be
cleaned at your expense before further processing.
Devices identified by this symbol may not be disposed of in the
municipal waste disposal services under observance of the Di‐
rective 2002/96/EC on waste electronic and electrical equipment
(WEEE).
They can be returned to the supplier within the EC or to a locally
approved disposal service. Observe the specific regulations valid
in your country.
Service and maintenance
12.6 Disposal
281