strokes greater than 35 to 130 mm", article number 6DR4004-8L, in addition to the mounting
set 6DR4004-8V. Keep the suitable installation parts ready:
Actuator type
Yoke with fin
Yoke with
plane surface
Yoke with col‐
umns
Procedure
"Linear actuator IEC 60534 (3 to 35 mm)" mounting kit 6DR4004-8V and 6DR4004-8L
Sr. no.
Quantity
Name
*)
①
1
NAMUR mounting bracket
IEC 60534
②
1
Pick-up bracket
③
2
Clamping piece
SIPART PS2 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00127926-AB
Required installation compo‐
nents
⑧
● Hexagon bolt
⑪
● Washer
⑩
● Spring lock washer
⑧
● Four hexagon bolts
⑪
● Washer
⑩
● Spring lock washer
⑦
● Two U–bolts
⑳
● Four hexagon nuts
⑪
● Washer
⑩
● Spring lock washer
Note
Standardized connection point for mount with fin, column or plane
surface
Guides the pulley with the carrier pin and rotates the lever arm.
Installs the pick-up bracket on the actuator spindle
Installing/mounting
4.2 Mounting the linear actuator
41