Siemens SIPART PS2 Operating Instructions Manual page 285

Construction
● On the linear actuator
● On the part-turn actuator
Weight, positioner without option modules or accessories
● 6DR5..0 Glass-fiber reinforced polycarbonate enclosure
● 6DR5..1 aluminum enclosure, narrow
● 6DR5..2 stainless steel enclosure
● 6DR5..3 aluminum enclosure
● 6DR5..5 aluminum enclosure, flameproof
● 6DR5..6 stainless steel enclosure, flameproof
Material
● Enclosure
6DR5..0 Makrolon
6DR5..1 aluminum, narrow
6DR5..2 stainless steel
6DR5..3 aluminum
6DR5..5 aluminum, flameproof
6DR5..6 stainless steel enclosure, flameproof
● Pressure gauge block
Versions
● In Makrolon enclosure 6DR5..0
● In aluminum enclosure 6DR5..1
● In aluminum enclosures 6DR5..3 and 6DR5..5
● In stainless steel enclosures 6DR5..2 and 6DR5..6
Torques
● Part-turn actuator fixing screws DIN 933 M6x12-A2
● Linear actuator fixing screws DIN 933 M8x16-A2
● Gland pneumatic G¼
● Gland pneumatic ¼" NPT
Without sealant
With sealant
● Cable glands
Screw-in torque for plastic gland in all enclosures
Screw-in torque for cable gland made of metal/stainless
steel in Makrolon enclosure
Screw-in torque for metal/stainless steel glands in alumi‐
num/stainless steel enclosure
SIPART PS2 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00127926-AB
Using mounting kit 6DR4004-8V and, where necessary, an
additional lever arm 6DR4004-8L on actuators according to
IEC 60534-6-1 (NAMUR) with a fin, columns, or a plane
surface.
Using mounting kit 6DR4004-8D on actuators with mount‐
ing plane according to VDI/VDE 3845 and IEC 60534-6-2:
The required mount must be provided on the actuator-side.
Approximately 0.9 kg (1.98 lb)
Approx. 1.3 kg (2.86 lb)
Approx. 3.9 kg (8.6 lb)
Approx. 1.6 kg (3.53 lb)
Approx. 5.2 kg (11.46 lb)
Approx. 8.4 kg (18.5 lb)
Glass-fiber reinforced polycarbonate (PC)
GD AISi12
Austenitic stainless steel 316 Cb, mat. No. 1.4581
GD AlSi12
GK AISi12
Austenitic stainless steel 316 L, mat. No. 1.4409 or 316 Ti,
mat. No. 1.4571
Aluminum AIMgSi, anodized or stainless steel 316
Single-acting and double-acting
Single-acting
Single-acting and double-acting
Single-acting and double-acting
5 Nm (3.7 ft lb)
12 Nm (8.9 ft lb)
15 Nm (11.1 ft lb)
12 Nm (8.9 ft lb)
6 Nm (4.4 ft lb)
4 Nm (3 ft lb)
6 Nm (4.4 ft lb)
6 Nm (4.4 ft lb)
Technical data
13.3 Construction
285