Siemens SIPART PS2 Operating Instructions Manual page 49

10.After commissioning, drive the positioner to the end position.
11.Stick the scale
H = height of shaft butt
①
②
Figure 4-6
SIPART PS2 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00127926-AB
④
with the direction of rotation or the swivel range on the coupling wheel
①
. The stickers with scale are self-adhesive.
Adhesive label with scale
Ø35 (1.38)
F05-Lkr.-Ø50 (1.97)
Fixing level of positioner on mount
Part-turn actuator
Dimensions of mount in accordance with VDI/VDE 3845 (depends on actuator)
4.3 Mounting the part-turn actuator
Adhesive label with scale, flameproof enclosure
Installing/mounting
49