J1.TUNIT - temperature unit
Possible settings:
Purpose:
Factory setting:
J2.LEVL1 - threshold 1
Adjustment range:
Purpose:
Factory setting:
J3.LEVL2 - threshold 2
Adjustment range:
Purpose:
Factory setting:
J4.LEVL3 - threshold 3
Adjustment range:
Purpose:
Factory setting:
SIPART PS2 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00127926-AB
°C
°F
Use this sub-parameter to set the temperature unit '°C' or '°F'. The
selected temperature unit is then also applicable for all other tem‐
perature-based parameters.
°C
-40.0C ... 90.0C
-40.0F ... 194.0F
Use this sub-parameter to set the temperature for threshold 1.
The positioner triggers a message if the current temperature inside
the enclosure overshoots threshold 1. The process to activate and
display this message is described in the 'XDIAG' parameter.
75.0C
-40.0C ... 90.0C
-40.0F ... 194.0F
Use this sub-parameter to set the temperature for threshold 2.
The positioner triggers a message if the current temperature inside
the enclosure overshoots threshold 2. The process to activate and
display this message is described in the 'XDIAG' parameter.
80.0C
-40.0C ... 90.0C
-40.0F ... 194.0F
Use this sub-parameter to set the temperature for threshold 3.
The positioner triggers a message if the current temperature inside
the enclosure undershoots threshold 3. The process to activate and
display this message is described in the 'XDIAG' parameter.
90.0C
Parameter assignment
9.3 Description of parameters
191