13.4 Unit Memory Detailed Information
13.4 Unit Memory Detailed Information
13.4.1 Alarm/Error/Warning
■
Error alarm setting
Unit memory
Name
No. (Hex)
UM 00062
Error alarm setting
Setting value (UM 00062)
Bit no.
Settings
b0-b7
(Reserved for system)
Double word access
b8
error annunciation
b9
Warning annunciation
b10-b15
(Reserved for system)
(Note 1)
This is set in the "Multi I/O Unit Setting" screen of tool software FPWIN GR7 (Available since Ver.1.1),
or using a user program.
■
Alarm / Error / Warning codes
Unit memory
Name
No. (Hex)
Double word access
UM 00063
error occurrence address
Unit alarm code
(H type only)
UM 00064
Unit error code 1
UM 00065
Unit warning code
UM 00066
Unit error code 2
13-24
Setting range and description
Set whether or not to announce abnormality when a double word
access error or warning occurs.
Default
Setting range and description
―
0: Announce
0: Announce
1: Not announced
0: Announce
0: Announce
1: Not announced
―
Setting range and description
Stores the address of a user program that an abnormal
access was made when the double word access error
has occurred.
Stores the alarm code when the following alarm occurs.
U20: Unit alarm
Stores the error codes when the following errors occur.
U1: Double word access error
Stores the warning codes when the following warnings
occur.
U1: Interrupt setting error
U2: Output setting error
U3: Input voltage setting error
U4: Pulse output setting error
U5: PWM output setting error
Stores the error codes when the following errors occur.
U26: System error
U44: Positioning Error
U45: Unit processing error
―
―
WUME-FP7MXY-06
R
W
―
―
A
A
A
A
―
―
R
W
A
―
A
―
A
―
A
―
A
―