Modifying Access Egress Qos Queues - Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual

Overview

Modifying Access Egress QoS Queues

To modify access egress queue parameters specify the following:
•
•
The following displays the access egress QoS policy configuration:
A:card-1>config>qos# info
#--------------------------------------------------
echo "QoS Policy Configuration"
#--------------------------------------------------
....
----------------------------------------------
A:card-1>config>qos#
Page 202
Queue ID value. 8 Queues are identified and are mapped as defined in
Forwarding Class to Queue-ID Map, on page
Queue parameters. Egress queues support configuration of CIR and PIR rates.
access-egress 30 create
remarking
queue 1
rate cir 100 pir 4500
exit
queue 2
exit
queue 3
exit
queue 4
exit
queue 5
exit
queue 6
exit
queue 7
exit
queue 8
exit
exit
53.
7210 SAS-E OS Quality of Service Guide
Table 17,